05-10-2010, 10:34
Dome size help - who's got wide XL?
January 11 2008 at 6:04 AM Louise (Login Louise1982)
SENIOR MEMBER
--------------------------------------------------------------------------------
Can anyone who's got the wide XL please measure the dimensions horizontal, vertical and circumference of the opening and also the depth +/- thickness of the silicone cushion.
I'm touching the narrow XL but not sure I could get the wide on.
Author Reply
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER domes January 11 2008, 9:33 PM
width side to side 6 top to bottom 8 3/4 inside to silicone 6 3/4 you can fit a xl/narrow inside them they are much bigger. I have both but prefer the xl/narrow if i have to go somewhere. with a big jacket on i can wear them and not look to outlandish. cant do it with the wide domes. brava needs to get a xxl/narrow set out.
I fill the narrow/xl pretty easy however. but about 1" from the wide if i do heavy suction.
Edit Message Delete Message
Louise
(no login) Re: Dome size help - who's got wide XL? January 11 2008, 9:50 PM
Thanks, do the wide take up a lot more room across your chest? If you suck hard do they bend inwards a bit?
I'm close (within half inch) of touching the end of narrow XL after a normal session but touching or yesterday squashed tight after a long session so wondering if I can get the wide or if they'll be too big (technically my underbust is too small for the narrow but I've had no probs getting a seal - I have lost 1-1.5 inches underbust since too).
Don't suppose you have a really manky set of wide XL going cheap that I could just try on then throw out?
Edit Message Delete Message
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER domes January 11 2008, 10:53 PM
i have a set that are ripped i could send you to try. but shipping isn't cheap.
Edit Message Delete Message
Louise
(no login) Re: Dome size help - who's got wide XL? January 11 2008, 11:07 PM
That would be great! How could I find out how much it would cost for 'surface mail'? I know it'd be a bulky package but they're not really heavy.
Edit Message Delete Message
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER zip January 11 2008, 11:22 PM
my zip is 92802 if you have the box and rack they came in that is what i will ship them in. so check fed ex or ups. also you are across the pond so not sure if there is a customs issue. add a couple pounds to what the xl/narrow weight is.
Edit Message Delete Message
Louise
(no login) Re: Dome size help - who's got wide XL? January 11 2008, 11:23 PM
I've had a cheaper idea! If you can give me these exact measurements I can cut templates out of card to be the same size as the silicone bits where they would rest on the skin just to check I can get two on my chest.
I wasn't quite sure about your measurements above but didn't want to be rude!
Please measure the smallest measurement inside the silicone and the largest outside the silicone and also the width of the silicone:
For the narrow XL I get:
Inside cushion:
Base width: 4 inches
Base length: 5.5
Cicumference: 14
Outside cushion:
Base width: 6.5
Base length: 8.5
Cicumference: 23.5
Width of cushion: 1.5
I really appreciate this, sorry to be a pain.
p.s. if you are still interested in trimming your lower body without affecting your boobs have a look at "Callanetics". I particularly recommend the Callanetics Countdown book and Beginning Callanetics video.
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER xl narrow vs xl wide January 12 2008, 1:12 AM
Inside cushion:
narrow xl/ wide xl
Base width: 4 inches/5 inches
Base length: 5.5/6
Cicumference: 14/18
Outside cushion:
Base width: 6.5/7
Base length: 8.5/8.5
Cicumference: 23.5/24
Width of cushion: 1.5/1.5
so looks like you could get them on. not that much diff in the dome surround 1" wider but you might be able to place them tight in the middle.
of course i am measuring very worn domes. so new may be a bit wider/longer on the base.
Louise
(no login) Re: Dome size help - who's got wide XL? January 12 2008, 6:32 PM
Thanks a lot for doing that, really appreciate it. I think if I suck hard enough they should bend inwards enough to get a seal, or I might do a few hours with the narrow to get some decent swelling (they're pretty huge in 1-2 hours now!) then I'll have more to put in the wides - thanks again.
January 11 2008 at 6:04 AM Louise (Login Louise1982)
SENIOR MEMBER
--------------------------------------------------------------------------------
Can anyone who's got the wide XL please measure the dimensions horizontal, vertical and circumference of the opening and also the depth +/- thickness of the silicone cushion.
I'm touching the narrow XL but not sure I could get the wide on.
Author Reply
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER domes January 11 2008, 9:33 PM
width side to side 6 top to bottom 8 3/4 inside to silicone 6 3/4 you can fit a xl/narrow inside them they are much bigger. I have both but prefer the xl/narrow if i have to go somewhere. with a big jacket on i can wear them and not look to outlandish. cant do it with the wide domes. brava needs to get a xxl/narrow set out.

Edit Message Delete Message
Louise
(no login) Re: Dome size help - who's got wide XL? January 11 2008, 9:50 PM
Thanks, do the wide take up a lot more room across your chest? If you suck hard do they bend inwards a bit?
I'm close (within half inch) of touching the end of narrow XL after a normal session but touching or yesterday squashed tight after a long session so wondering if I can get the wide or if they'll be too big (technically my underbust is too small for the narrow but I've had no probs getting a seal - I have lost 1-1.5 inches underbust since too).
Don't suppose you have a really manky set of wide XL going cheap that I could just try on then throw out?
Edit Message Delete Message
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER domes January 11 2008, 10:53 PM
i have a set that are ripped i could send you to try. but shipping isn't cheap.
Edit Message Delete Message
Louise
(no login) Re: Dome size help - who's got wide XL? January 11 2008, 11:07 PM
That would be great! How could I find out how much it would cost for 'surface mail'? I know it'd be a bulky package but they're not really heavy.
Edit Message Delete Message
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER zip January 11 2008, 11:22 PM
my zip is 92802 if you have the box and rack they came in that is what i will ship them in. so check fed ex or ups. also you are across the pond so not sure if there is a customs issue. add a couple pounds to what the xl/narrow weight is.
Edit Message Delete Message
Louise
(no login) Re: Dome size help - who's got wide XL? January 11 2008, 11:23 PM
I've had a cheaper idea! If you can give me these exact measurements I can cut templates out of card to be the same size as the silicone bits where they would rest on the skin just to check I can get two on my chest.
I wasn't quite sure about your measurements above but didn't want to be rude!
Please measure the smallest measurement inside the silicone and the largest outside the silicone and also the width of the silicone:
For the narrow XL I get:
Inside cushion:
Base width: 4 inches
Base length: 5.5
Cicumference: 14
Outside cushion:
Base width: 6.5
Base length: 8.5
Cicumference: 23.5
Width of cushion: 1.5
I really appreciate this, sorry to be a pain.
p.s. if you are still interested in trimming your lower body without affecting your boobs have a look at "Callanetics". I particularly recommend the Callanetics Countdown book and Beginning Callanetics video.
seri_flamehair
(Login Seri_Flamehair)
SENIOR MEMBER xl narrow vs xl wide January 12 2008, 1:12 AM
Inside cushion:
narrow xl/ wide xl
Base width: 4 inches/5 inches
Base length: 5.5/6
Cicumference: 14/18
Outside cushion:
Base width: 6.5/7
Base length: 8.5/8.5
Cicumference: 23.5/24
Width of cushion: 1.5/1.5
so looks like you could get them on. not that much diff in the dome surround 1" wider but you might be able to place them tight in the middle.
of course i am measuring very worn domes. so new may be a bit wider/longer on the base.
Louise
(no login) Re: Dome size help - who's got wide XL? January 12 2008, 6:32 PM
Thanks a lot for doing that, really appreciate it. I think if I suck hard enough they should bend inwards enough to get a seal, or I might do a few hours with the narrow to get some decent swelling (they're pretty huge in 1-2 hours now!) then I'll have more to put in the wides - thanks again.