09-10-2010, 11:19
Brava dome pressure
May 11 2007 at 4:55 AM Seri_Flamehair (Login Seri_Flamehair)
SENIOR MEMBER
--------------------------------------------------------------------------------
try this trick out.
If your domes when you put water into them only dribble out of one side faster than the other side. then you have mismatched dome pressure. which will cause one dome to have higher suction.
If this is happening to your domes do what i did. take a drill bit that is just a tad snug in the tube connection and carefully drill the plastic a bit. then try the water test again should flow freely out of both domes the same rate. then you should have balanced pressure.
Author Reply
Julie
(no login) Re: Brava dome pressure May 15 2007, 7:06 AM
Thanks for the tip (but the more I find out about brava the more complex it seems).
May 11 2007 at 4:55 AM Seri_Flamehair (Login Seri_Flamehair)
SENIOR MEMBER
--------------------------------------------------------------------------------
try this trick out.
If your domes when you put water into them only dribble out of one side faster than the other side. then you have mismatched dome pressure. which will cause one dome to have higher suction.
If this is happening to your domes do what i did. take a drill bit that is just a tad snug in the tube connection and carefully drill the plastic a bit. then try the water test again should flow freely out of both domes the same rate. then you should have balanced pressure.
Author Reply
Julie
(no login) Re: Brava dome pressure May 15 2007, 7:06 AM
Thanks for the tip (but the more I find out about brava the more complex it seems).