28-10-2010, 11:20
BB not working?
May 19 2008 at 6:12 PM arzoo (no login)
--------------------------------------------------------------------------------
hello everyone
today was my first day trying out BB. I did everything that was on the instruction page. i used the first nozzle and connected its ends to the domes that fitted me. it started as well but i did not feel anything.. yes, nothing at all. i could hear it making noise, i could notice the vaccuming sound but i kept in on my breasts for like 5 minutes and didn't feel anything..and the SESL was turned on too
am i doing it right?
please help
Author Reply
Alcest
(Login Alcest) Re: BB not working? May 20 2008, 12:08 AM
There's a bit of a learning curve with the BB.....the domes were probably not positioned exactly right so that they could form a suction...try rotating them. If not that, try a different size domes. The larger ones are harder to stick to me because I have such a bony rib cage they have nothing to sink into and "grab onto".... Experiment. I hope it works better. It seems to be working if it's making noise and you feel air sucking from the gauge---- It is probably just an issue of suction.
Good luck.
kieyah
(Login kieyah)
SENIOR MEMBER Re: BB not working? May 20 2008, 3:37 AM
Do you have the suction turned down too low? To check if machine has suction, remove the domes and place a finger over the the hose ends and see if you can feel the suction. If not try removing the tubing and place finger over #1 port and see if you can feel the suction. if not try turing the suction dial up (clockwise) and check again. if you feel nothing, try the #2 port and see if you feel any pressure. if you feel any pressure in #2 (which is really strong and not for use on breast) but nothing in #1 it is just too low of a suction setting. If you feel nothing in either one and turning the suction up doesn't work you may have a loose set screw.
Louise
(Login Louise1982)
SENIOR MEMBER Re: BB not working? May 22 2008, 7:43 PM
Take the very smallest dome and attach that to the machine without the y-shape tube so you only have one dome sucking - now stick that on your belly or thigh and press really hard, turn up the SESL slowly (clockwise). As soon as you get a seal turn it off and go back to doing your boobs! Are you definitely using the port on the left (the right port blows air out to help you apply fake tan to your bathroom carpet!).
glee
(no login) Re: BB not working? May 23 2008, 6:15 AM
I had the same problem. try not to expand your ribcage and rotate them to get the best fit. I also found that attaching them and then lifting got the suction.
May 19 2008 at 6:12 PM arzoo (no login)
--------------------------------------------------------------------------------
hello everyone
today was my first day trying out BB. I did everything that was on the instruction page. i used the first nozzle and connected its ends to the domes that fitted me. it started as well but i did not feel anything.. yes, nothing at all. i could hear it making noise, i could notice the vaccuming sound but i kept in on my breasts for like 5 minutes and didn't feel anything..and the SESL was turned on too
am i doing it right?
please help
Author Reply
Alcest
(Login Alcest) Re: BB not working? May 20 2008, 12:08 AM
There's a bit of a learning curve with the BB.....the domes were probably not positioned exactly right so that they could form a suction...try rotating them. If not that, try a different size domes. The larger ones are harder to stick to me because I have such a bony rib cage they have nothing to sink into and "grab onto".... Experiment. I hope it works better. It seems to be working if it's making noise and you feel air sucking from the gauge---- It is probably just an issue of suction.
Good luck.
kieyah
(Login kieyah)
SENIOR MEMBER Re: BB not working? May 20 2008, 3:37 AM
Do you have the suction turned down too low? To check if machine has suction, remove the domes and place a finger over the the hose ends and see if you can feel the suction. If not try removing the tubing and place finger over #1 port and see if you can feel the suction. if not try turing the suction dial up (clockwise) and check again. if you feel nothing, try the #2 port and see if you feel any pressure. if you feel any pressure in #2 (which is really strong and not for use on breast) but nothing in #1 it is just too low of a suction setting. If you feel nothing in either one and turning the suction up doesn't work you may have a loose set screw.
Louise
(Login Louise1982)
SENIOR MEMBER Re: BB not working? May 22 2008, 7:43 PM
Take the very smallest dome and attach that to the machine without the y-shape tube so you only have one dome sucking - now stick that on your belly or thigh and press really hard, turn up the SESL slowly (clockwise). As soon as you get a seal turn it off and go back to doing your boobs! Are you definitely using the port on the left (the right port blows air out to help you apply fake tan to your bathroom carpet!).
glee
(no login) Re: BB not working? May 23 2008, 6:15 AM
I had the same problem. try not to expand your ribcage and rotate them to get the best fit. I also found that attaching them and then lifting got the suction.