[admin]

Help How do I set up Noogleberry
October 2 2008 at 3:45 AM delicate41 (Login delicate41)

--------------------------------------------------------------------------------

Hi

I ordered the double breast with airlock noogleberry pump. I believe I set it up correctly. I attached the T straps to domes. The airlock is connected to Pump but now I have just two disconnected cords meeting each other where the t-strap is suppose to connect with airlock. What am I doing WRONG. HELP. Thanks



Author Reply
waxingmoon
(Login waxingmoon)
SENIOR MEMBER Re: Help How do I set up Noogleberry October 2 2008, 4:06 AM


Hi Delicate,
You should have 3 tubes. Two of the tubes go to the domes and then to the T connector. The other tube attaches to the inline connector and then you attach the other part of the connector which is then linked to the pump.

If you go to the noogle website and click on the spare parts you will see all the parts and it will probably be more clear.

Best wishes,
waxingmoon


Edit Message Delete Message

delicate41
(Login delicate41) Re: Help How do I set up Noogleberry October 2 2008, 4:26 AM


Thanks.

But how do I attach the inline connector? I just have a tube with an opening at the end.

delicate41


Edit Message Delete Message

waxingmoon
(Login waxingmoon)
SENIOR MEMBER Re: Help How do I set up Noogleberry October 2 2008, 1:39 PM


Hmmmm...

The connector has 2 parts which form a whole unit when snapped together- there is a tube leading into one side and a tube coming off the other side.
I wonder if you have both parts of the connector...

Go to this link and scroll down to the bottom of the page. It has a picture of the airlock kit.

http://www.noogleberry.com/spare_parts_brst.html

It looks pretty straight forward. I don't have the airlock myself and I haven't felt like I have needed it. Since the domes tend to lose a small amount of air I occasionally pump them to maintain or increase the pressure. I also tend to move in a way that dumps out a bunch of air and have to re-pump again.

You might just try hooking the pump directly to the T connector and see if you can get by with that.

waxingmoon



delicate41
(no login) Re: Help How do I set up Noogleberry October 2 2008, 2:53 PM


Thanks so much for your help. I finally have it working.